Uploading A Configuration Script To A Tftp Server; Deleting A Script - Dell Force10 S2410-01-10GE-24P Configuration Manual

Command Syntax
script show .scr
scriptname
Figure 3-32. Using the script show Command
Force10 #script show test.scr
1 : !Current Configuration:
2 : !
3 : hostname "Force10"
4 : network parms 10.10.1.33 255.255.255.0 10.10.1.254
5 : interface vlan 11
6 : !System Description "Force10 S50"
10 : !System Description F.5.6.2
...

Uploading a Configuration Script to a TFTP Server

To upload a "config script" to a TFTP server, use the
Command Syntax
copy nvram:script
scriptname
/ .scr
x.x.x.x scriptname
Figure 3-33. Using the copy nvram:script Command
Force10 #copy nvram:script test.scr tftp://10.16.1.56/test.scr
Mode........................................... TFTP
Set TFTP Server IP............................. 10.16.1.56
TFTP Path......................................
TFTP Filename.................................. test.scr
Data Type...................................... Config Script
Source Filename................................ test.scr
Are you sure you want to start? (y/n) y
File transfer operation completed successfully.

Deleting a Script

To delete a "config script", use the
Command Syntax
script delete <scriptname.scr>
Command Mode
Privileged Exec
Command Mode
.scr tftp:// Privileged Exec
script delete
Command Mode
Privileged Exec
Purpose
To view a configuration script by specific name.
command.
copy
Purpose
Copies the config script from the NVRAM to a TFTP
server.
command.
Purpose
Deletes the named script from the switch memory.
Getting Started | 61