Navman Tracker 5430 Installation And Operation Manual page 27

Setup menu map, with factory default settings in brackets
System
Chart
GPS
Fuel
Track
Logs
Alarms
Units
Comms
Time
Simulate
Setup menu
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual
Rotation (North up)
Projected course (Off )
CDI scale (0.1 nm)
Plotter mode (Off )
Map datum (WGS84)
NMEA datum off set (Off )
Map shift (None)
Waypoints (Selected)
Anticlutter (Off )
Lat.Lon Grid (Off )
Boundaries (On)
Names (On)
Attention Areas (On)
Water Features (On)
Water depth
Lights (On)
Nav-Aids (Int)
Land Features (On)
Tank full
Set remaining (0)
Clear Used
Tank size (0)
Num Engines (0)
Fuel cal
Flow fi lter (5)
Reset trip dist
Reset total dist
Trip dist
Total dist
Arrival radius (Off )
Anchor alarm (Off )
XTE (Off )
Danger (Off )
Low fuel (Off )
DGPS (On)
NMEA out
NMEA data
Lat/Lon d.p's (3)
NavBus (Off )
NavBus group (0)
Simulate (Off )
Mode (Normal)
Speed (1 kn)
Heading (0°M)
Route
Language (English)
Backlight
Keybeep (On)
Factory reset
Bathymetric Lines (On)
Spot soundings (On)
Bath & Sndgs Min: (0 m)
Bath & Sndgs Max: (15 m)
GPS source (Internal)
DGPS Source (None)
Restart GPS
Static Navigation (Off )
Speed Filter: (5)
Course Filter: (4)
Record (1)
Display (1)
Plotting Interval (Distance)
Distance (0.1 nm)
Time (10 seconds)
Memory used
Delete track
Distance (nm)
Speed (kn)
Depth (fa)
Fuel (litres)
Compass (°M)
Temperature (°C)
Wind (true)
Local off set (0)
Time format (24 hour)
Date format (dd/MMM/yy)
27