Basic Operation; Overview Of The Keys - Navman Tracker 5430 Installation And Operation Manual

2 Basic operation

8

Overview of the keys

ESC Go back to an earlier menu or display. Any changes are
ignored.
DISP Show a menu of the main TRACKER displays. To go to a
display, select it from the menu (see section 2-2).
, , , Cursor keys, to move the cursor or the selection
highlight.
MENU Show a menu of the options for the current display. Press
MENU again to display the setup menu (see section 13).
ENT Start an action or accept a change or when displaying a
map press twice to create an instant waypoint at the boat
position (see section 9-2-1).
Zoom in and display a smaller area of the chart in more
detail.
Zoom out and display a bigger area in less detail.
Man overboard (MOB, see section 2-4).
Turn TRACKER on and off (see section 2-1); adjust the display
(see section 2-3).
Keys
In this manual:
Press means to push the key for less than a second.
Hold means to hold the key down.
The internal beeper beeps when a key is pressed (to disable or
enable the beep, see section 13-1).
To select an item in a menu
The TRACKER is operated by selecting items from menus shown on
the display.
1 Press or to move the highlight to the item.
2 Press ENT or to select the item.
Change a number or word
To change a number or word on the display:
1 Press or to move the highlight to the digit or letter to
change.
Press or to change the digit or letter.
2 Repeat the above step to change any other digits or letters.
3 Press ENT to accept the change.
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual