Navigating A Route - Navman Tracker 5430 Installation And Operation Manual

4 To insert a waypoint in the route:
i Select where the waypoint will be:
To insert the first waypoint in a new
route, select Leg 1.
To insert a waypoint at the end of the
route, select the unused leg at the
end of the list of waypoints.
Otherwise, select the waypoint to
insert the new waypoint in front of.
ii Press ENT. A list of waypoints is displayed.
Select the waypoint to use.
As waypoints are inserted, the distance and
bearing of each leg is shown automatically. If
the route has more waypoints than will fit on
the display, press
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press MENU and select Remove.
6 Repeat this process until the route is finished.
7 Press ESC.
8 Display the route on the chart (see section
10-2-3) and check that the route does not
cross land or dangerous water.
10-2-2 Editing a route
Editing a route from the chart
1 In the routes display, select the route to edit.
Press MENU and select Edit on chart.

10-3 Navigating a route

10-3-1 Starting a route
To start the boat navigating along a route:
1 In the routes display, press
highlight the route to use. Press MENU and
select Start.
2 The TRACKER asks for the direction to
traverse the route.
Select Forward (the order the route was
created) or Reverse.
3 It displays a chart with the route marked and
starts navigating from the start of the route.
24
or to see them.
or to
2 The selected route is displayed on the chart,
with a circle around the first waypoint.
3 Edit the route as described in section 10-2-1
A, starting at step 4.
Editing a route from the routes display
1 In the routes display, press
highlight the route to edit. Press MENU and
select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 10-2-1
B, starting at step 3.
10-2-3 Displaying a route on the chart
This goes to the chart display, and shows the
selected route at the centre of the display.
1 In the routes display, press
highlight the route to display. Press MENU
and select Display.
2 It returns to the chart display, with the
selected route displayed.
10-2-4 Deleting a route
1 In the routes display, press
highlight the route to delete. Press MENU
and select Delete.
2 Select Yes to confirm.
10-2-5 Deleting all routes
1 In the routes display, press MENU and select
Delete all.
2 Select Yes to confirm.
10-3-2 Skipping a waypoint in a route
To skip a waypoint when the boat is navigating
along a route:
In the chart display, press MENU and select
Skip.
The TRACKER starts navigating straight towards
the next waypoint on the route.
Warning: Skipping a waypoint with the
autopilot on might result in a sudden course
change.
10-3-3 Cancelling a route
To stop the boat navigating along a route:
In the chart display, press MENU and select
Cancel route.
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual
or to
or to
or to