Routes; Routes Display - Navman Tracker 5430 Installation And Operation Manual

3 Change the waypoint data (see section
9-2-7). Select Save.
Editing a waypoint from the waypoints
display
1 In the waypoints display, press
highlight the waypoint to edit. Press MENU
and select Edit.
2 Change the waypoint data (see section
9-2-7). Select Save.
9-2-4 Displaying a waypoint on the chart
This goes to the chart display, and shows the
selected waypoint at the centre of the display.
1 In the waypoints display, press
highlight the waypoint to display. Press
MENU and select Display.
2 The TRACKER switches to the chart display,
with the selected waypoint at the centre of
the chart.
9-2-5 Deleting a waypoint
A waypoint can not be deleted if the boat is
navigating to it or if the waypoint is used in more
than one route. A waypoint that is used in one
route can be deleted.
Warning when a waypoint is deleted from
a route, check that the changed route does
not cross land or dangerous waters.

10 Routes

A route is a list of waypoints that the boat can
navigate along. Routes can be created, changed
and deleted.
The TRACKER can have up to 25 routes. Each
route can have up to 50 waypoints. A route can:
Start and stop at the same waypoint .
Include waypoints more than once.

10-1 Routes display

The routes display is a list of the routes that
have been entered, each with route name, start
waypoint, end waypoint, number of legs and
total distance.
To go to the routes display, press DISP and select
Routes.
22
Deleting a waypoint from the chart display
1
2
or to
3
Deleting a waypoint from the waypoints
display
1
2
9-2-6 Deleting all waypoints
or to
1
2
9-2-7 Changing a waypoint's data
To change the waypoint data when it is displayed
in a window:
1
2
3
The TRACKER can navigate along a route in
either direction. Waypoints on the route can
be skipped.
Routes are a powerful feature when the TRACKER
is connected to an autopilot, allowing the vessel
to be automatically guided along the route.
cross land or dangerous water.
NAVMAN
In the chart display, move the cursor to the
waypoint to delete.
Press MENU and select Delete.
Select Yes to confirm.
In the waypoints display, press
highlight the waypoint to delete. Press MENU
and select Delete.
Select Yes to confirm.
In the waypoints display and press MENU
and select Delete all.
Select Yes to confirm.
Select the data to change.
Press ENT.
Use the cursor keys to change the data.
Press ENT.
If necessary, repeat the above step to change
other data.
Select Save.
Warning: Make sure that routes do not
TRACKER 5430/5430i Installation and Operation Manual
or to