Waypoints Display; Managing Waypoints - Navman Tracker 5430 Installation And Operation Manual

If there are many waypoints, use this feature
to select which waypoints are displayed on
the chart.

9-1 Waypoints display

To go to the waypoints display, press DISP and
select Waypoints (see right).
The waypoints display is a list of the waypoints
that have been entered, each with waypoint
symbol, name, latitude and longitude, distance
and bearing from the boat, type and display
option.

9-2 Managing waypoints

Warning: Do not create a navigation
waypoint on land or in dangerous water.
9-2-1 Creating a new waypoint
Creating and editing a new waypoint from
the chart display
1 To create a waypoint at the boat position,
press ESC to centre on the boat.
To create a waypoint at a different point,
move the cursor to that point on the chart.
2 Press ENT and select save, or press MENU
and select New waypoint.
3 A new waypoint, with the default name and
data is created.
4 Change the waypoint data if necessary (see
section 9-2-7). Select Save.
Creating a new waypoint from any display
Press ESC on any display to switch to the chart.
Follow the steps as described above.
To change the default data, (see section 9-2-3).
Note: If a GPS fix hasn't been acquired, a waypoint
will be created at the cursor position instead of the
boat position.
Creating a new waypoint from the waypoints
display
1 In the waypoints display, press MENU and
select Create.
2 A new waypoint, with a default name and
data, is created at the boat position.
3 Change the waypoint data if necessary (see
section 9-2-7). Select Save.
Note: Waypoints can also be created when a route
is created (see section 10-2-1).
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual
Note: the other choices for the "Waypoints"
setup option are "Hide all" (no waypoints are
displayed on the chart) and "Show all" (all the
waypoints are displayed on the chart) (see
section 13-2).
9-2-2 Moving a waypoint
Moving a waypoint from the chart display
1 In the chart display, move the cursor to the
waypoint to move.
2 Press MENU and select Move.
3 Move the cursor to the new position and
press ENT.
Moving a waypoint from the waypoints
display
To move a waypoint from the waypoints display,
edit the waypoint (see section 9-2-3) and change
the latitude and longitude.
9-2-3 Editing a waypoint
Editing a waypoint from the chart display
1 In the chart display, move the cursor to the
waypoint to edit.
2 Press MENU and select Edit.
21