Navman Tracker 5430 Installation And Operation Manual page 43

Navman chartplotter
Table of Contents

Advertisement

Navigation data
The boat is sailing from the start to the destination and has moved off the plotted course from the start
to the destination.
BRG
Bearing to Destination
+BRG
Bearing to cursor
CDI
Course Deviation Indicator
COG
Course Over Ground
CTS
Course To Steer
DTG
Distance To Go
ETA
Expected Time of Arrival
+RNG
Range to cursor
SOG
Speed Over Ground
STR
Steering
TTG
Time To Go
XTE
Cross Track Error
VMG
Velocity Made Good
Destination
SOG (speed)
STR
Plotted
course
Start
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual
Bearing to the destination from the boat.
Bearing to cursor from boat (cursor mode, see section 3-1-1).
When the boat is navigating to a point, the chart and highway dis-
plays show a parallel line on either side of the plotted course. These
two lines are called the Course Deviation Indicator (CDI) lines. The
distance from the plotted course to a CDI line is the CDI scale.
Set the CDI scale (see section 13-2) to the maximum distance that the
boat should deviate from the plotted course. The chart and highway
displays show the CDI lines, which are like a highway over the water
where the boat will move. The displays show how far the boat has
deviated from the plotted course and if the boat is approaching a
CDI line. If the XTE alarm is enabled (see section 13-6) an alarm will
sound if the boat reaches a CDI line.
Direction in which the boat is moving over the ground.
Optimum course to steer to return to the plotted course.
Distance from the boat to the destination.
At the destination, assuming that SOG and COG remain constant.
Distance from boat to cursor (cursor mode, see section 3-1-1).
Current boat speed over the ground. This is not necessarily the
same as the boat speed through the water nor the speed at which
it is approaching the destination.
The diff erence between COG and CTS.
The estimated time to reach the destination.
The distance from the boat to the nearest point of the plotted course.
XTE may have a letter: R means steer to the right to return to the
plotted course, L means steer to the left.
The speed at which the boat is approaching the destination.
DTG (distance)
VMG (speed)
BRG
COG
CTS
Boat position
Destination
Plotted
XTE
course
(distance)
Boat
position
CDI scale
CDI scale
(distance)
(distance)
Start
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracker 5430i

Table of Contents