Satellite Display; Tides Display - Navman Tracker 5430 Installation And Operation Manual

Navman chartplotter
Table of Contents

Advertisement

7-1 Satellite display

The satellite display has information about the
GPS satellites and GPS position.
To go to the satellite display, press DISP and
select Satellite.
The satellite display
shows:
Time & date from
GPS satellites. Time is
local time (UTC (GMT)
plus local offset, see
section 13-10).
HDOP: The error in
the GPS position
caused by satellite
geometry. A low
value indicates a
more precise fix,
a high value a less
precise fix.
Signal strengths of
up to twelve visible
GPS satellites. The
higher the bar the
stronger the signal.

8 Tides display

The tides display shows tide information at a tide
station for the selected date.
To go to the tides display for the tide station
nearest to the boat, press DISP and select Tides.
To go to the tides display for any tide station:
1
From the chart display, press MENU and
select Find.
2
Select Tide stations.
3
A list of tide stations are displayed. Select the
tide station to display. The chart redraws with
the tide station centred.
NAVMAN
TRACKER 5430/5430i Installation and Operation Manual
When the TRACKER is turned on, the satellite
display is shown automatically while the GPS
antenna starts up.
4
Press MENU and select Chart info.
5
Select Tide height.
Choosing the date of the tide chart
1
Press MENU.
2
Select Today, Next day or Prev day.
To choose a different date from these, select
Set date, edit the date, press ENT.
Status of GPS antenna, for
example Acquiring, GPS
fix, No GPS. If the unit is in
Simulate mode it displays
Simulate (see section 2-6).
Positions of visible GPS
satellites:
Outer circle is horizon
Inner circle is 45°
elevation
Centre is directly
above
North is at top of
display
If the boat is moving, COG
is a line from centre.
Boat position.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracker 5430i

Table of Contents