NICAM
NICAM programmes are devided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual
(transmission in another language).
NICAM programmes are always accompanied
by a standard mono sound broadcast and you
can select the desired soound. Please refer to
page 28.
1
Press the MENU button, then press the OK
or button.
SETUP
Language
Clock
DVD
Install
VCR
User Set
Auto Power Off
PROG
Screen Messages
FUNC
2
Press the or button to select User Set,
then press the OK or button.
The User Set menu is displayed.
SETUP
Colour System
NICAM
DVD
IPC
VCR
PROG
FUNC
3
Press the or button to select NICAM,
then press the OK or ¤button to select On
or Off.
• On (for NICAM mode):
Normally set at this position.
• Off (for MONO mode):
Only set at this position to record the
standard mono sound during a NICAM
broadcast if the stereo sound is distorted
due to inferior reception conditions.
Setup
: English
: Off
: On
User Set
: Auto
: On
: On
Intelligent Picture Control
This feature allows you to adjust the sharpness
of the image automatically, according to your
own preferences.
1
During playback, press the MENU button,
then press the OK or button.
2
Press the or button to select User Set,
then press the OK or button.
The User Set menu is displayed.
3
Press the or button to select IPC
(Intelligent Picture Control), then press the OK
or button.
SETUP
Colour System
NICAM
DVD
IPC
VCR
PROG
FUNC
• You can select the modes simply by press-
ing the IPC button.
4
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the ¦ or buttons until the picture is
displayed according to your preferences.
❉ ❉
PICTURE ❉ ❉
IPC : OFF
SOFTEN
¦ ¦ ¤ ¤
User Set
: Auto
: On
: On
SHARPEN
❉
ON/OFF :
English - 21