Table of Contents
Advertisement
Selecting the Cassette Type
GB
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
OPTIONS
PROG
OPTIONS
INSTALL
2
CLOCK
BONUS
LANG
USER SET
3
➛❿!!
ENTER
END:SETUP
" ❷!!
4
5
OPTIONS
OSD
:ON
❿
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
NICAM
:ON
6
❿
END:SETUP
" ❷
Selecting the Recording Speed
You can record a cassette at two different speeds:
Type
Recording Time (in SP)
In Long Play modes:
E-180
180 mins. or 3 hours
E-240
240 mins. or 4 hours
E-260
260 mins. or
4 hours and 20 mins.
E-300
300 mins. or 5 hours
To record a cassette...
In standard play mode
In long play mode
REC
FRAME/STEP
24
Press SETUP on the remote control.
Result:
The programming menu is displayed.
Press the corresponding
,
or ➛, ❿ buttons to select the
"
❷
USER SET
option.
Press the ENTER button to select this option.
Press the corresponding
or
buttons, until the cursor is placed
"
❷
in front of the
TAPE SELECT
option.
Press the ➛ or ❿ buttons as many times as required, until the
correct cassette length is displayed.
E180
E240
E 300
E260
Press SETUP twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
The recording is of a slightly lower quality
Press the SPEED button on the
remote control, until...
SP
is displayed.
LP
is displayed.
NICAM(OPTION)
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1
Press SETUP on the remote control.
Result:
The programming menu is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
"
❷
USER SET
option.
3
Press the ENTER button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
"
❷
placed in front of the
NICAM
option.
5
Press ➛ or ❿, until...
To...
Mono mode
OFF
is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
NICAM mode
ON
is displayed.
ON: Normally set at this position.
6
On completion, press SETUP twice to exit the menu.
This option is not available Australia model.
GB
PROG
OPTIONS
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿!!
ENTER
END:SETUP
" ❷!!
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
IPC
:ON
❿
NICAM
:ON
❿
END:SETUP
" ❷
25
Advertisement
Table of Contents
