Netware Setup Wizard; How To Start The Netware Setup Wizard - Xerox DocuPrint 240A User Manual

9.2

NetWare Setup Wizard

You can set or change the initial settings for the NetWare server and the printer by using
the NetWare Setup Wizard. This wizard can be used when setting the printing environment
by using the NetWare server.
This wizard can be used by starting it from the Software Pack CD-ROM.
Refer to
• How to use the NetWare Setup Wizard: Online Help for the wizard

How to Start the NetWare Setup Wizard

The following procedure explains how to start the NetWare Setup Wizard.
Note
• For Windows NT 4.0/Windows 2000/Windows XP, log on as a user of the administrator group or as the
administrator.
1. If a virus-check software has been installed, either uninstall it or switch it off.
2. Insert the Software Pack CD-ROM into the CD-ROM drive.
The [Fuji Xerox Setup Menu] dialog box appears automatically.
3. Click [CD ROM reference] to browse the contents. Then open the [Netware] folder in
the [NetUtil] folder, and then double-click [nsw.exe].
4. Set the setting items as following the messages displayed.
For details about how to use the NetWare Setup Wizard, refer to the Online Help for
the wizard.
56
9 Network Utility Software