Paper Type Priority - Xerox 4112 System Administration Manual

Setups

Paper type priority

Set the paper type priority sequence for automatic tray selection. Automatic tray selection
means that a tray containing the appropriate paper is automatically selected by the machine
for printing.
You can select from a variety of paper types including bond paper, plain paper, recycled paper,
side 2 paper, etc.
Note
The paper type selections for this feature will vary depending on your machine and your
work environment requirements (such as the types of paper you use most frequently).
Note
The paper type setting takes precedence over the tray priority sequence. If different paper
types appear in the same priority sequence, the paper selection is determined by tray
priority sequence.
For information about the tray priority sequence, refer to "Paper tray priority" in this
chapter.
1. From the Paper Tray Settings screen, select Paper Type Priority.
2. Select the item to be set or changed, and select Change Settings.
3. Select the priority sequence for this paper type.
4. Select Save to save the setting and to return to the Paper Type Priority screen.
5. Select Close to return to the Paper Tray Settings screen.
3-24
Xerox 4112/4127 EPS
System Administration Guide