Auto Print; Printer Lockout Duration - Xerox 4112 System Administration Manual

Setups

Auto print

Set the time from the end of the print job until the execution of the next print job. Set the value
from 1 to 240 seconds, in one second increments.
If you select Off, once the machine is ready, printing can start immediately.
1. From the Machine Clock/Timers screen, select Auto Print, and select Change Settings.
2. Select Off or On.
3. If you selected On, set the wait-to-print time by using the
enter a numeric quantity.
4. Select Save to save the settings and return to the previous window.

Printer Lockout Duration

Set the time from the start to the end of printer lockout. Set the values from 0 to 23 hours and
to 59 minutes. If you select Off no printer lockout occurs.
1. From the Machine Clock/Timers screen, select Printer Lockout Duration, and select
Change Settings.
2. Select Off or On.
3. If you selected On, set the time by using the
numeric quantity.
4. Select Save to save the settings and return to the previous window.
3-10
Xerox 4112/4127 EPS
System Administration Guide
, , or the numeric keypad to
, , or the numeric keypad to enter a