Auto Job History - Fuji Xerox DocuPrint M205 b User Manual

Alert Tone
All Tones
• mm/inch
Purpose:
To specify the measurement unit displayed after the numeric value on the operator panel.
Values:
Millimeters (mm)*
Inches (")

• Auto Job History

Purpose:
To automatically print a job history report after every 20 jobs.
Values:
Off*
On
NOTE:
• The Job History report can also be printed using the Report/List menu.
• Low Toner Alert Msg
Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*
Off Does not emit a tone when a problem occurs.
Low Emits a tone at the specified volume when a problem occurs.
Medium*
High
Off Disables all the alert tones.
Low Sets the volume of all the alert tones at once.
Medium
High
Specifies the default measurement unit.
Does not automatically print a job history report.
Automatically prints a job history report.
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
Using the Operator Panel Menus and Keypad 162