➜
valet mode
You can prevent your security system from automatically arming
and triggering by using Valet
washing the vehicle or having it serviced. In Valet
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, trunk release, etc.)
will continue to work normally.
To enter or exit Valet
The status LED will light solidly if you are entering Valet
Mode, and it will go out if you are exiting Valet
To enter or exit Valet Mode using the transmitter:
1. Open any vehicle door.
2. Press
3. Press
4. Press
The status LED will light solidly if you are entering Valet
Mode, and it will go out if you are exiting Valet
➜
remote start
This feature allows you to remotely start and run your vehicle for
a programmable period of time. This makes it possible to warm
© 2006 directed electronics
®
Mode:
®
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet
button within 10 seconds.
.
.
again.
Mode. This is very useful when
®
®
Mode, the
®
DRW-35
®
Mode.
®
Mode.
27