Customizing The Banner - NETGEAR ProSafe SSL312 Reference Manual

Figure 7-9
To add a Terminal Services Application:
1. Enter a description of the application in the Application Description field. This name will be
shown beneath the application icon on the SSL VPN Portal Applications page.
2. Enter the path and application name of the Terminal Services application in the Application
and Path field.
Note: To launch a Terminal Services application individually, the Terminal Server
must be run in Application mode. In addition, the application must be installed
through the Control Panel Add/Remove Programs. For more information,
see the NETGEAR Support Site.
3. Select an image to show on the Applications page from the Icon Image menu.
4. Click Add Application to add the new application to the SSL VPN Portal Applications page.
Apply the portal layout to one or more SSL VPN Concentrator authentication domains.

Customizing the Banner

An administrator can further customize the portal by uploading a a customized image for the
banner.
Domains and Layouts
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
v1.0, August 2006
7-13