NETGEAR ProSafe SSL312 Reference Manual page 47

Figure 5-3
To configure a static route:
1. In the Add Static Routes section, enter the destination network address of the static route in
the Destination Network field. The destination network address is an IP address in the remote
network subnet.
Note: The destination network address may be a valid IP address or it may be a
subnet address that ends in ".0", such as "192.168.0.0".
2. Enter the subnet mask of the remote network segment in the Subnet Mask field.
Network Settings
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
v1.0, August 2006
5-5