NETGEAR ProSafe SSL312 Reference Manual page 40

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Figure 4-10
2. Click Enable. The SSL VPN Concentrator software will restart using the new certificate.
In order to obtain a valid certificate from a widely accepted Certificate Authority such as Verisign
or Thawte, you must generate a Certificate Signing Request for your SSL VPN device.
Note: Most valid certificates created by a Certificate Authority (CA) require a
password. Before you enable the certificate and restart the software, be sure to
enter the correct certificate password on the View Certificate screen
The Current Certificates table lists the valid SSL certificates. (The Certificate being used by the
SSL VPN Concentrator will not show an "enable" link.)
To view details of currently available certificates:
In the Certificate table, click the name of the certificate. The View Certificate window will
display for that certificate From the View Certificate window, you can view the issuer and
certificate subject information.
4-10
v1.0, August 2006
.
General Settings