NETGEAR ProSafe SSL312 Reference Manual page 80

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Figure 7-6
3. Enter a descriptive name for the authentication domain in the Domain Name field. This is the
domain name users will select in order to log into the SSL VPN portal. It can be the same
value as the Server Address field or the Active Directory Domain field depending on your
network configuration.
4. Enter the IP address or host and domain name of the Active Directory server in the Server
Address field.
5. Enter the Active Directory domain name in the Active Directory Domain field.
6. Select the name of the layout from the Portal Layout Name menu The default layout is SSL-
VPN. Additional layouts may be defined in the Portal Layouts page.
7. Check the Require client digital certificates checkbox to force users to supply a valid digital
certificate before granting access. The CNAME of the client certificate must match the user
name that the user supplies to log in and the certificate must be generated by a certificate
authority (CA) that is trusted by the SSL VPN Concentrator.
8. Click Apply to update the configuration. Once the domain has been added, the domain will be
added to the table on the Domains screen
7-8
v1.0, August 2006
Domains and Layouts