Back Panel - NETGEAR ProSafe SSL312 Reference Manual
Ssl vpn concentrator 25
Hide thumbs
Also See for ProSafe SSL312:
- Network manual (4 pages) ,
- Troubleshooting manual (3 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
1. LED Power Indicator:
•
Off – No power
•
On – Power is on.
2. LED Self test Indicator.
•
Self test – on while initializing. (~2 minutes)
•
Loading Software – blinking while uploading software
•
System fault – on (prolonged)
This LED may blink for a minute before going off.
3. Two 10/100M Ethernet ports:
•
A solid green LED indicates a connectivity link has been established on either the 10M or
100M interface.
•
A blinking green LED indicates activity on either the 10M or 100M interface.
4. Serial Console Port
Male DB-9 serial port for serial DTE connections.
5. Restore to Factory Defaults Button
Back Panel
The SSL VPN Concentrator back panel hardware is shown in
power On/Off switch and the 110-240V power cord connection.
Figure 1-2
Note: Never substitute a power cord. Only use the power cord provided with the SSL
VPN Concentrator.
1-4
Figure 1-2
v1.0, August 2006
below and consists of the
Introduction
Advertisement
Table of Contents
