Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe
SSL VPN Concentrator 25.
Factory Default Settings
You can use the reset button located on the front of your device to reset all settings to their factory
defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in
Table A-1
below.
•
Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table A-1. SSL312 Default Configuration Settings
Feature
AP Login
User Login URL
User Name (case sensitive)
Login Password (case sensitive)
Ethernet Port 1
IP Address
Subnet Mask
Port Speed
Gateway Address
Ethernet Port 2
IP Address
Subnet Mask
Port Speed
Default Settings and Technical Specifications
Description
192.168.1.1
admin
password
192.168.1.1
255.255.255.0
10/100
0.0.0.0
10.0.0.1
255.0.0.0
10/100
v1.0, August 2006
Appendix A
A-1