Editing A User - NETGEAR ProSafe SSL312 Reference Manual

If the selected group is in a domain that uses internal database authentication, such as the
default "geardomain" domain, then the following window will display:
Figure 6-12
5. Enter the user password in the Password field.
6. Re-enter the password in the Confirm Password field.
Note: Both the user name and password are case-sensitive.
7. Select the user type from the User Type pull-down menu, (either User or Administrator).
8. Click Apply to update the configuration. Once the user has been added, the new user will be
added to the table in the Users and Groups screen.

Editing a User

To edit a user:
1. Click the name of the user in the Users table on the Users and Groups screen. The User
Settings window will display as shown in
• The Edit User Settings section shows the User Name, Group Name, and Domain
Name. These fields are not configurable. If information supplied in these fields need to be
modified, then remove the user by clicking Delete User and then recreate the user with the
correct information.
• If the user authenticates to an external authentication server, then the User Type and
Password fields will not be shown. The password fields are not configurable because the
authentication server will validate the password. The user type is not configurable because
the SSL VPN Concentrator only allows users that authenticate to the internal user database
to have administrative privileges.
Group and User Access Policies
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
v1.0, August 2006
Figure 6-13.
6-15