Back Panel Of The Netgear Wireless-N Access Point; Netgear Wireless-N Access Point Default Settings Location - NETGEAR WN802T Reference Manual

Back Panel of the NETGEAR Wireless-N Access Point

The back of the WN802T v2 contains the following listed items, viewed from top to bottom:
Figure 1-2 Back panel of the WN80Tv2
1. The Reset button, which is used to reset the WN802T v2 or restore the factory default settings.
See Appendix A, "Default Settings and Technical Specifications"
restoring the factory default settings.
2. The Ethernet port, used to establish a 10 Mbps, 100 Mbps or 1000 Mbps connection with the
network.
3. AC Universal Power Supply outlet.
NETGEAR Wireless-N Access Point Default Settings
Location
The label on the rear panel of the wireless access point contains the serial number, MAC address,
and default login information for your WN802T v2 device.
Introduction
NETGEAR Wireless-N Access Point WN802T v2 Reference Manual
Reset button
Ethernet port
Power outlet
v1.0, September 2008
for more information on
1-5