Clear Cmos Jumper; Bios Recovery By Crisis Disk - Packard Bell EasyNote TK13BZ Service Manual

Clear CMOS Jumper

Figure 5-6. CMOS Jumper
Table 5-5. CMOS Jumper
Item
R582

BIOS Recovery by Crisis Disk

BIOS Recovery Boot Block
BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with
minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a
successful one once the previous BIOS flashing process failed.
BIOS Recovery Hot key
The system provides a function hot key, <Fn+Esc>, for enable BIOS Recovery process when
system is powered on during BIOS POST. To use this function, it is strongly recommended to
have the AC adapter and Battery present. If this function is enabled, the system will force the
BIOS to enter a special BIOS block, called Boot Block.
5-8
Clear CMOS Jumper
Description
Jumper and Connector Locations
0
0
0
0