Packard Bell T19 Disassembly Manual
  1. Manuals
  2. Brands
  3. Packard Bell Manuals
  4. Laptop
  5. T19
  6. Disassembly manual
Packard Bell T19 Disassembly Manual

Packard Bell T19 Disassembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Disassembly Manual
version
change
0.1
Copied text from written notes
0.2
Added photos & corrected layout
Disassembly Manual EasyNote J2 series
T19
by
Page 1 of 15
date
DE
18-10-2005
DE
19-10-2005

Advertisement

Table of Contents
loading

Related Manuals for Packard Bell T19

Summary of Contents for Packard Bell T19

  • Page 1 Disassembly Manual EasyNote J2 series Disassembly Manual version change date Copied text from written notes 18-10-2005 Added photos & corrected layout 19-10-2005 Page 1 of 15...

  • Page 2: Bottom Cover

    Disassembly Manual EasyNote J2 series Battery & Dummy Cards 1. Remove the Battery. 2. Take out the (dummy) Memory Card. 3. Take out the (dummy) PCMCIA Card. Figure 1 Bottom Cover 1. Remove 3 x A screws from the Bottom Cover (fig. 1). 2.

  • Page 3: Hard Disk Drive

    Disassembly Manual EasyNote J2 series Figure 2 Hard Disk Drive 1. Remove 3 x A screws. 2. Slide out the Hard Disk Drive (HDD) Assembly. 3. Remove 1 x A screw from the HDD Mounting Bracket and remove it. Figure 3 Page 3 of 15...

  • Page 4: Memory Module

    Disassembly Manual EasyNote J2 series 4. Remove 4 x B screws from the HDD Bracket and remove it. Figure 4 Memory Module 1. Remove the Memory DIMM(s) from the Memory Slot(s). Optical Disk Drive 1. Push out the Optical Disk Drive (ODD). 2.

  • Page 5: Cpu Module

    Disassembly Manual EasyNote J2 series 3. Remove 2 x C screws from the ODD Bracket and remove it from the ODD. Figure 6 4. Remove 1 x A screw and 1 x D screw from the ODD Frame and remove it. Figure 7 CPU Module 1.
  • Page 6 Disassembly Manual EasyNote J2 series Figure 8 Video Graphics Accelerator Board 1. Remove 2 x C screws from the Video Graphics Accelerator (VGA) Board. 2. Remove the VGA Board. 3. Disconnect the VGA Connectors from the VGA Board. Figure 9 Keyboard 1.

  • Page 7: Main Board

    Disassembly Manual EasyNote J2 series Figure 10 Mainboard 1. Remove 2 x E screws from the Rear of the unit. 2. Remove 2 x A screws from the Battery Connector Bracket and remove it. Figure 11 3. Remove 2 x F hexbolts from the VGA Connector (right side of unit). Figure 12 Page 7 of 15...
  • Page 8 Disassembly Manual EasyNote J2 series 4. Remove 2 x A screws from the Chipset Heatsink and remove it. 5. Remove 4 x A screws from the Mainboard. 6. Disconnect the two (2) Flatcables from the Mainboard. 7. Slide the Mainboard out of the Bottom Base Assembly. Figure 13 Modem 1.

  • Page 9: Lcd Assembly

    Disassembly Manual EasyNote J2 series LCD Assembly 1. Push the Hinge Covers In + Up to release, then remove the Hinge Covers. Figure 15 2. Push the LCD Assembly all the way open. 3. Remove 2 x E screws and Grounding Cable from the Left LCD Hinge. 4.
  • Page 10 Disassembly Manual EasyNote J2 series Figure 17 LCD Assembly 1. Remove 2 x C screws from the Inverterboard. 2. Disconnect the Inverterboard Cables. 3. Remove the Inverterboard. 4. Remove 2 x E screws from the Right & Left LCD Bracket. 5.

  • Page 11: Wireless Lan Board

    Disassembly Manual EasyNote J2 series Figure 19 Wireless LAN Board 1. Remove 1 x C from the Wireless LAN (WLAN) Board (fig. 19). 2. Disconnect the WLAN Signal Cable and remove it. LCD Panel 1. Remove 4 x C screws from the Left LCD Bracket and remove it. 2.

  • Page 12: Bottom Base Assembly

    Disassembly Manual EasyNote J2 series Figure 20 Bottom Base Assembly 1. Remove 15 x D screws from the Bottom Base Assembly. 2. Disconnect the Launch Board Flatcable. 3. Disconnect the USB Connector Cable. Page 12 of 15...

  • Page 13: Top Cover

    Disassembly Manual EasyNote J2 series Figure 21 4. Remove the 2 x D screws and 1 x G screw. 5. Unclip the Top Cover from the Bottom Base Assembly. Figure 22 Top Cover 1. Remove the USB Board Cable. 2. Remove 4 x C screws from the Launch Board. 3.

  • Page 14: Touchpad Module

    Disassembly Manual EasyNote J2 series Figure 23 Touchpad Module 1. Disconnect the Touchpad Cable from the Touchpad Module. 2. Unclip the Touchpad Frame in the order shown below. 3. Push out the Touchpad Module from the Top Cover. Figure 24 Jumpers/Dipswitches There are no jumpers or dipswitches in this model.
  • Page 15 FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. Copyright © 2005 NEC Computers International BV. All rights reserved. Packard Bell is a trademark of NEC Computers International BV. The names of actual companies and products mentioned herein may be trademarks and/or registered trademarks of their respective owners.

Table of Contents