Power Board Removal; Power Board Installation - Packard Bell EasyNote TK13BZ Service Manual

Power Board Removal

Prerequisite:
Upper Cover Removal
1. Find power board (B) on upper cover.
2. Remove power board FFC (Flat Flex Cable) (A) from upper cover. (Figure 3-22)
3. Remove one (1) screw (B). (Figure 3-22)
Figure 3-22. Power Board
4. Remove power board from upper cover.

Power Board Installation

1. Install power board (B) on upper cover.
2. Install power board FFC (A) on upper cover. (Figure 3-22)
3. Install and secure one (1) screw (B) to lower cover. (Figure 3-22)
4. Install upper cover.
ID Size
B M2.5*3.0
3-26
(Figure 3-20)
B
A
(Figure 3-20)
Quantity
1
Machine Maintenance Procedures
0
0
Screw Type