Power Button Board; Volume Control Board - Packard Bell iPower GX Disassembly Manual

5. Carefully release the black clip securing the flat cable and disconnect the cable from the
header on the main board.
6. Remove the keyboard cover.

Power Button Board

The power button board is located on the inside of the keyboard cover. To remove the power
button board, first remove the keyboard cover (see Keyboard Cover on page 13) and then perform
the following steps:
1. Release the white clip securing the flat cable and disconnect the cable from the header on
the power button board.
2. Remove the screw securing the power button board to the keyboard cover (see
3. Remove the power button board.

Volume Control Board

The volume control board is located on the inside of the keyboard cover. To remove the volume
control board, first remove the keyboard cover (see Keyboard Cover on page 13) and then perform
the following steps:
Fig. 26 Releasing the keyboard cover flat cable.
Fig. 27 Location of the power button board.
Packard Bell iPower GX Disassembly Manual
14
).
Fig. 27