Inner Paper Deflector Assembly Removal - Toshiba e-STUDIO500P Service Manual

Inner paper deflector assembly removal

1.
Remove the paper tray.
2.
Remove the upper paper deflector assembly. See
page 4-79.
3.
Remove the MPF lower deflector assembly. See
4.
Place the printer on its side.
5.
Gently pry the inner paper deflector from the left and right mounting posts (A) located on the bottom of the
printer, and remove the deflector.
6.
Disengage the two latches (B) on the upper part of the deflector from the upper edge of the frame (C), and
lift to remove.
B
C
"Upper paper deflector assembly removal" on
"MPF lower paper deflector" on page
A
C
4-61.
4-47
Repair information