Developer Drive Coupler Kit Removal; Esd Cover Removal - Toshiba e-STUDIO500P Service Manual

Developer drive coupler kit removal

1.
Remove the developer drive. See
2.
Remove the shaft drive and coupler.

ESD cover removal

1.
Open the multipurpose tray, and remove the tray from the two mounting posts. See
lower front cover assembly removal" on page
2.
Carefully lift the latch on the left (A), and remove the ESD cover.
Note: Be careful not to stress the hinge on the right (B).
"Developer drive assembly removal" on page
4-15.
4-24.
"Multipurpose feeder/
4-25
Repair information