Fuser Narrow Media Flag And Spring Removal - Toshiba e-STUDIO500P Service Manual

Fuser narrow media flag and spring removal

1.
Remove the fuser narrow media sensor. See
2.
Note the position of the spring (A) in relation to the flag (B).
3.
Carefully ease the right arm (C) of the sensor cover just far enough apart to release the flag and spring.
Spring replacement
1.
Place the spring on the left pin (A).
2.
Set the tang (B) on the flag.
4-36
Service Manual
"Fuser narrow media sensor removal" on page 4-34.