Fanfold Paper Guide Module (B-4905-Ff-Qm-R); Applicable Model; Packing List; Installation Procedure - Toshiba TEC B-SX4T Series Maintenance Manual

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT
EO18-33012B
4.20 FAN FOLD PAPER GUIDE MODULE (B-4905-FF-QM-R)

4.20 FANFOLD PAPER GUIDE MODULE (B-4905-FF-QM-R)

WARNING!
Disconnect the power cord before installing the Fanfold Paper Guide Module.

4.20.1 Applicable Model

This optional device is the fan fold paper guide, which is intended for the following models:
B-SX4T-QM-R Series, B-SX5T-QM-R Series

4.20.2 Packing List

All the following parts are supplied with the kit. Make sure you have all items shown below.
Description Q'ty/unit
Fanfold Paper Guide (rear) 1

4.20.3 Installation Procedure

1) Open the top cover.
2) Remove the two FL-4x5 screws to detach the blind plate on the back of the printer and attach the
fanfold paper guide (rear) with these same screws.
Screw (FL-4x5)
Fanfold Paper Guide (rear)
Screw (FL-4x5)
4-121
Mantenimiento Periféricos Informáticos C/Canteras,15 28860 Paracuellos de Jarama Madrid Tel: 91 748 16 04 www.mpi.com.es