Design Of Paper Roll - Toshiba TRST-A10 SERIES Product Description

2. SUPPLY SPECIFICATIONS
2.2

DESIGN OF PAPER ROLL

Use only paper which meets the following specification.
Paper type
Width (W1)
Width (W2)
Outer diameter (D)
Paper thickness (T)
Weight
Outer core diameter
Inner core diameter
Recommended thermal paper
NOTE: Use of non-specified paper may cause the following problems.
•
Print quality problem
•
Paper feed problem
•
Cut problem
•
Paper jam
•
Discoloring, etc.
W1 or W2
Thermal paper rolled with the print side facing outside
80 +/ -1.0 mm
58 +0/ -1.0 mm (With optional 58 mm paper guide)
76 +/-2.0 mm
0.065 +/- 0.005 mm
2
53 g/m
21.5 mm
12.5 +/- 0.5 mm
Only paper rolled onto a core is acceptable, however, the paper
end should not be pasted to the core. TOSHIBA TEC
recommends using the following thermal paper for this product.
Manufacturer : NIPPON PAPER
Type : TF50KS-E
2-3
EO10-13009A
2.2 DESIGN OF PAPER ROLL