Printhead Removal - Toshiba e-STUDIO500P Service Manual

Printhead removal

CAUTION: The printhead is not a serviceable FRU. Do not disassemble the printhead.
1.
Remove the laser cover. See
2.
Disconnect the printhead cable (A) from the printhead assembly.
3.
Remove the three printhead mounting screws (B), and remove the printhead.
Note: Do the "Printhead assembly adjustment" on page 4-2
assembly or loosen the mounting screws.
"Laser cover removal" on page 4-19.
whenever you remove or replace the printhead
Repair information
4-73