1. OUTLINE
EO10-33021
1.10 MECHANICAL BLOCK
1.10.4 Media Roll Holder
The main parts of the Media Holder Block are as follows.
Media Near End Sensor
By adopting a reflective
sensor, this sensor detects
a media near end state
when the media is reduced
under the sensor window.
Unlock Lever
Media Roll Holder Unit
Note: The on or off status of the media near end sensor can be switched with the Lever. Move the lever
into OFF position for using the fanfold paper. If it remains in ON position, a media near end error is
detected, causing that no print operation is performed.
ON position
Sensor Window
OFF position
Lever
1-14