Door Removal; Door Replacement And Adjustment - Viking VGIC5304BWH Use & Care Manual

Door Removal

WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the hinges.
Failure to do so can result in
personal injury to hands
and/or fingers.
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
38
1
Open door completely.
Place pin in pin hole.
3
Close until pins stop door.

Door Replacement and Adjustment

1
Reinstall door to range.
3
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen
hinge trim screws located in step 2. Adjust
the screws located between the door
and kickplate using a 5/32" hex head
allen wrench. After adjustment,
tighten hinge trim screws.
39
2
Open door completely.
Reinstall hinge trim.
4
Close door.