Creating A New Menu; Opening An Existing Menu - TurboChef ChefComm Pro Operating Instructions Manual

4 B U I L D I N G / M O D I F YI N G A M E N U
3. All TurboChef products will be listed. Click the
"expand" arrow in the
locate your oven from the list (Figure 10).
Figure 10: Locate and Select Your Oven Type
4. If desired, select your oven's rack and cooking
surface (Figure 11) for reference when developing
menus. This setting is not required when creating a
new oven type.
Figure 11: Select the Rack and Cook Surface
Oven Revision pane and
5. Enter the name of the new oven type. In Figure
11, the name is My
6. Click OK to confirm the new oven type.
7. Click Close to exit the Oven Configuration Wizard.

Creating a New Menu

1. From the main ChefComm window, set the
New Menu Configuration
menu you are working with (Figure 7, page 3).
2. Click the "New Menu" icon (Figure 12).
Figure 12: New Menu

Opening an Existing Menu

1. From the main ChefComm window, click the
Open Menu icon (Figure 13).
Figure 13: Open Menu
2. In the "files of type" field, select "Menu Files"
(Figure 14). All ChefComm menu files (XTM
files) within the folder will be displayed.
Figure 14: Open an Existing Menu
3. Locate the file and select Open.
NGC.
to match the type of