Baxi Bioflo Installation & Servicing Instructions Manual page 36

Pellet central heating system boiler

Hide thumbs Also See for Bioflo:

Table of Contents

For the Electrician

All electrical components (sensors, etc.) on the terminal blocks (screwless spring-type terminals) should be con-

nected with fine-wire PVC sheathed cables and be fixed at the rear with strain reliefs – Figs. 48, 49.

Two separate cables are required for connecting the boiler to the suction turbine or changeover unit – this is a

requirement of the guarantee conditions!

Recommended accessories: Ribbon cable FIRE 042 or FIRE 043; 5 x 2.5 mm

Guide the ribbon cable through the rectangular openings and secure with cable ties as strain relief – Fig. 50.

Each cable must be routed separately together with the delivery and return air hose. The cables can be

routed together with the hoses through the fire protection collars to the suction turbine or to the

changeover unit.

Fig. 48

Terminal blocks in the control

panel

Fig. 50

Cable feed-throughs – rear view

and 8 x 1 mm

Fig. 49

Strain reliefs and feed-through

for ribbon cable

Strain reliefs

Low voltage (230

VAC)

Ribbon cable