For the Installer
Stainless steel flue accessory DN 100
Wall thickness of the stainless steel flue accessory is: 0.6 mm
Push-in depth into sleeve: 80 mm
Not illustrated: Wall trim ring AZB 056, length compensator 200 – 400 mm with adhesive tape
Pipe
AZB 052
Bend 0–90° adjustable with inspection opening –
AZB 051
Pipe
AZB 053
Pipe clamp – AZB 055
125
125
Bend 90° rigid – AZB 050
136
Double bend rigid – AZB
Pipe
057 for exhaust pipe
AZB 061
connection in the middle
Pipe with measuring opening –
AZB 054
Fig. 43
Stainless steel flue accessory
32