No Application File Or Application File Needs Upgrading; Correct Boot File And Application File Already Loaded - Avaya IP Office 3.0 Installation Manual

No Application File or Application File Needs Upgrading

This happens with normal application file upgrades. Having processed the upgrade script file, the
software determines that the name of the boot file in the telephone is the correct version. It next
determines that the name of the application file does not match that stored in the phone.
1. The phone displays the required file name as it downloads the file from the TFTP server. It also
displays the number of kilobytes downloaded.
2. The phone displays Saving to flash. It also displays the percentage of file stored and the
number of seconds that have elapsed. This will usually take longer than it took to download the
file.
3. The phone is reset so that the new system-specific application file can be executed.
4. Continue with the next procedure; Correct Boot File and Application File Already Loaded.

Correct Boot File and Application File Already Loaded

This happens with most normal restarts. Having processed the upgrade script file, the software
determines that the name of the boot file in the telephone and the telephone application file match those
specified in the upgrade script.
1. System-specific registration with the switch is started. The phone request the extension number it
should use and the password.
• By default the phone displays the last extension number it used and the user can accept
that by pressing #.
• Whilst a password request is shown, password verification is not performed except if the
user changes the extension number.
• The password checked against is the User's Login Code stored in the IP Office Manager.
2. Upon completion of registration, dial-tone is available on the telephone.
Avaya IP Phone Installation
IP Office 3.0
Appendix C: Scenarios for the Restart Process
Issue 10b (26th January 2005)
Page 33