View Administrative Details - Avaya IP Office 3.0 Installation Manual

IP Office IP Phone Installation Manual

View Administrative Details

You can use the following procedure to view a number of telephone details. These are in addition to the
other static address and local administration options which can also be used to review settings.
1. While the phone is on-hook and idle, press the following sequence: Hold 8 4 3 9 # (Hold V I E W
#)
2. The phone displays View settings.
•
Press * at any time during viewing to display the set of details.
• Press # at any time during viewing to end the procedure and restore the user interface to
its previous state.
3. The names and values displayed are:
•
Model
Shows the phones model number; for example. 4624D02A.
• Market
Shows 1 for export or 0 for domestic (US).
• Phone SN
Shows the phone's Serial Number.
•
PWB SN
Shows the phone's Printed Wiring Board Serial Number.
• PWB comcode
Shows the PWB's comcode.
• MAC address
Shows the phone's MAC address as paired hexadecimal numbers.
•
filename1
Shows the name of the telephone application file in the phone's memory.
• 10MBps Ethernet or 100Mbps Ethernet
Shows the speed of the detected LAN connection.
• filename2
Shows the boot file name and level. Note these are values from within the boot file loaded
and not the actual file name.
Avaya IP Phone Installation
IP Office 3.0 Issue 10b (26th January 2005)
Page 24