User Pc Connection - Avaya IP Office 3.2 Installation Manual

IP Phone Installation Manual

User PC Connection

To simplify the number of LAN connections from the user's desk, it is possible to route their PC Ethernet
LAN cable via some H.323 IP phones. The LAN cable should be connected from the PC to the socket
with a PC symbol ( ) at the back of the IP phone. The PC's network configuration does not need to be
altered from that which it previously used for direct connection to the LAN.
Those phones that include a PC pass-through port and also provide priority to phone voice traffic over
PC data traffic are normally indicated by an SW suffix on the phone name. In addition, some phones
have a PC pass-through port but do not provide switching priority. The table below summarizes the
phones:
H.232
IP Phone
4601
4602
4602SW
4606
4610SW
4612
4620IP
4620SW
• *The 4606, 4612 and 4624 phones can be upgraded to provide voice priority switching by fitting
an Avaya 30A Switch Upgrade Base to the phone. In addition, this base also allows the phone to
be powered from a IEEE 802.3af Power over Ethernet source.
Phone Installation Guide
IP Office 3.2
PC Port With Voice
Priority
*
*
H.232 PC Port With Voice
IP Phone
4621
4624
5601
5602
5602SW
5610SW
5620
5620SW
15-601042 Issue 11e (27th June 2006)
Priority
*
Page 10