Stop The Melody Sound Only; Noise Abatement Circuit; Anti Car- Jacking; Active Anti Car Jacking - Autopage RS-720LCD Operation Manual

Professional remote car starter with alarm system & 2-way lcd communication
Table of Contents

Advertisement

Warn-away Trigger
CLEAR THE FLASH ICON AND MELODY SOUND: When the
alarm is triggered, the LCD screen will aler t the user
through a melody sound and by flashing a trigger icon.
Press the
the flash icon and stop the melody sound on the LCD
screen transmitter.
STOP THE MELODY SOUND ONLY: When the alarm is
triggered the LCD screen will alert the user through a
melody sound and a flashing trigger icon. Press any
button on the LCD remote transmitter to stop the melody
sound.
NOISE ABATEMENT CIRCUIT: Your system has a "Noise Abatement Circuit". It
prevents annoying repetitive trigger sequences due to faulty door pin switches or
environmental conditions such as thunder, jackhammers airport noise, etc.
Here's how "Noise Abatement Circuit" works: The alarm triggers five times. Each
time, the same sensor or switch has triggered the alarm; the "Noise Abatement
Circuit" will interpret this pattern of triggers as a false alarm. After the third trigger,
the "Noise Abatement Circuit" ignores, or bypasses, that sensor or switch until a
different sensor or switch is trigger.
"Noise A batement Circuit" covers doors (Hood/Trunk) differently: If the alarm is
triggered by an open door for six full cycles, the doors will be bypassed until the
trigger ceases.
O. ANTI CAR- JACKING
Warning: If you don't need the car jacking function in this a larm system, be sure to
set car jacking feature "OFF". This system is default setting all car jacking "OFF".

ACTIVE ANTI CAR JACKING:

1. Press and hold the transmitter
while the vehicle's ignition is ON. The pa rking lights will turn on for 1.5 seconds to
indicate entry.
2. Once the system is armed, if you are forced from the vehicle, the system will
trigger when the door is opened and closed while the ignition is "ON".
PASSIVE ANTI CAR- JACKING:
It will operate as noted below:
1. Turn the ignition switch to the "ON" position and the system will arm.
2. Once the system is armed, if you are forced from the vehicle, the system will
trigger when the door is opened and closed while the ignition is "ON".
TRIGGER THE ANTI CAR -JACKING MODE:
a). 50 seconds after the system has beer triggered. The siren will start chirping for
15 seconds.
b). During this 15 second period of chirping, you will be alerted to push the valet
switch once to turn off the car-jacking feature. If not, it will enter a second timer for
car jacking.
button 3 times within 3 seconds to clear
and
buttons at the same time for 2 seconds
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents