Autopage RF-503 Operation Instructions Manual
  1. Manuals
  2. Brands
  3. Autopage Manuals
  4. Car Alarm
  5. RF-503
  6. Operation instructions manual
Autopage RF-503 Operation Instructions Manual

Autopage RF-503 Operation Instructions Manual

Hide thumbs Also See for RF-503:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
Congratulations on your purchase of the RF-503 vehicle security system.
AutoPage, Inc. Is one of the companies with the longest history and experience in vehicle
security in the United States, and a wholly owned subsidiary of Iwata Electric Co., Tokyo,
Japan. Iwata has been an industry leader for 45 years, establishing a reputation for ingenuity in
its engineering capability and innovative communication products. AutoPage and Iwata maintain
the long tradition of providing the best value to their customers.
We sincerely hope the purchase of the RF-503 vehicle security system provides peace of mind
to you.
Please take the time to read over this operation manual to thoroughly familiarize yourself with
the many features and options of the RF-503.
THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY !
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
FEDERAL COMMUNICATION COMMISSION RULES AND REGULATIONS
PROHIBIT THE ADJUSTMENT OF THE TRANSMITTER PORTION OF THIS
!!NOTICE!!
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
SYSTEM BY UNLICENSED PERSONNEL.
1

Advertisement

Table of Contents
loading

Related Manuals for Autopage RF-503

Summary of Contents for Autopage RF-503

  • Page 1 AutoPage and Iwata maintain the long tradition of providing the best value to their customers. We sincerely hope the purchase of the RF-503 vehicle security system provides peace of mind to you. Please take the time to read over this operation manual to thoroughly familiarize yourself with the many features and options of the RF-503.
  • Page 2 (2) times, and the doors will unlock (**). NOTE (*): The RF-503 is capable of two methods for audible alarm trigger. You may choose at the time of installation to honk the vehicle’s horn, you may choose the standard electronic siren, or both.

  • Page 3: Panic Function

    ARM/DISARM chirp sound. 3. PANIC FUNCTION The RF-503 remote control may be used as a remote control panic switch to trigger the horn or siren in cases of emergency. To activate the PANIC FUNCTION press and hold the Button I on the remote transmitter for a minimum of three (3) seconds.

  • Page 4: Changing The Remote Transmitter Battery

    NOTE: If the automatic rearm feature was chosen at the time of installation, a door must be opened after disarming. If a door is not opened, the RF-503 will automatically rearm in 60 seconds, and the LED will continue to flash. See section (F ) AUTOMATIC REARM for details.
  • Page 5 NOTE: Both the VALET and OVERRIDE functions are performed from the same switch. 1. OVERRIDE FUNCTION The OVERRIDE FUNCTION may be used if the RF-503 remote is lost or inoperative. To operate the OVERRIDE FUNCTION, enter the vehicle (alarm will sound). Switch the ignition to ON. Move the VALET/OVERRIDE switch to ON, then OFF.

  • Page 6: Passive Arming

    4. Close the exit, and the LED will start flashing again. 5. The RF-503 will count down for 30 seconds. After 30 seconds, the vehicle horn or siren will chirp one (1) time, and the parking lights will flash one (1) time indicating the RF-700 has armed.

  • Page 7: Automatic Rearming

    F. AUTOMATIC REARMING The RF-503 is equipped with an automatic rearming circuit that will return the alarm to a fully armed state if a door is not opened within 60 seconds after disarming, regardless of which method was used to arm.

  • Page 8: Shock Sensor

    3. If optional sensors have been installed, arm the RF-503 and test according to the directions of the particular sensor. If triggered in the armed condition, the RF-503 will sound the vehicle horn or siren, and flash the parking lights for 60 seconds. It will then stop and automatically reset and rearm. If the violation continues, the alarm will sound and the lights will flash for two (2) 60 seconds cycles.
  • Page 9 To test the SIS-5 shock sensor, arm the RF-503. Then sharply kick one of the vehicle’s tires(*), or slap the glass (**) with the open palm of your hand. The alarm will immediately trigger. NOTE (*): Do not test the shock sensor by hitting any of the body panels.
  • Page 10 The second transmitter is now programmed. NOTE: If the RF-503 does not receive a second transmitter code to learn within five (5) seconds, it will automatically close the programming mode and resume normal alarm functions. If this happens, it will be necessary to repeat steps 1 through 5 and reprogram all transmitters.
  • Page 11 AUTOPAGE ALARM ACCESSORIES AP4000EX Vehicle security paging was originated by AutoPage over 18 years ago. The AP4000EX is our latest version providing a full four watts of output, and a unique digital format. One AP4000EX pager is capable of monitoring up to three vehicles. (*) The pager will notify you with a choice of audible, visual, or vibration alerts.
  • Page 12 AP4000DX The AP4000DX is a full four watt paging system. The signal is received from a handsome belt-clip paging receiver indicating your RF-503 has been triggered, even if you cannot hear the siren. RS-32 Dual Stage Perimeter Protection Sensor The RS-32 utilizes microwave technology that emits dual protective fields. The easy and separate...
  • Page 13 After one (1) year, the purchaser should ship the unit pre-paid to AutoPage with a money order in the amount of $20.00 to cover handling and shipping charges. Note: The WARRANTY CARD on the back of this page may be required to receive warranty services.
  • Page 14 This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD which must have complete information to receive warranty service.
  • Page 15 “Proof of purchase" which includes the store name and date of purchase must accompany all warrantyd returns. It is your responsibility to keep this card for any future warranty service. -------------------------------- For You Records -------------------------------- DATE SERVICE COMPLETED...

Table of Contents