Override The System To Turn Off Anti Car Jacking; System's Trigger Check; System's Status Check; Driver Paging (Option) - Autopage RS-720LCD Operation Manual

c). 65 seconds after the system has been triggered, the siren will start sounding
and the parking lights will start flashing.
d). 90 seconds after the system has been triggered,
1. The siren will sound and the parking lights will flash, and
2. The starter disable will activate to prevent the vehicle from starting.
3. It will remain active until the vehicle's battery power is exhausted.
OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:
Turn the ignition switch from OFF to ON, and within 10 seconds push valet switch,
the siren will stop and the system disarmed
Note: If you use password pin code to double protect the vehicle security, you will
need to use it to completely disarm the system.
P. SYSTEM'S TRIGGER CHECK
Press the transmitter
(C)
button. It will respond with one melody sound and
all trigger records will be immediately displayed on the
LCD screen.
Note: If it has no response, then you are out of range.
Q. SYSTEM'S STATUS CHECK
When you want to check the system's present status
through the LCD screen, Press the transmitter
button twice. Within 3 seconds press the
It will respond with one melody sound.
Note: If it has no response then you are out of range.
R. DRIVER PAGING
In the event that someone wants to page the driver of the parked vehicle.
In Car Driver Paging
With the ignition in the switched "off" condition, press and hold the valet switch for 2
seconds to page the driver. One chirp sound will be emitted from the vehicle and the
paging melody sound will continue sounding from your Remote LCD Transmitter
and the " " icon will flash on the LCD screen.
Out of Car Driver Paging (Optional Feature)
If someone tries to page you by tapping the pag ing (knock) sensor (OPTIONAL)
which is usually mounted on the bottom part of front window, the paging melody
sound continues sounding from you Remote LCD Transmitter and the "
will flash on the LCD screen.
1. Press the transmitter
( )
press button to activate the out-of-car driver
paging function . It will respond with chirps from the
vehicle, plus a melody will sound and the "
flash on the LCD screen to confirm the function is on.
first, within 3 seconds press
(C)
button.
button first, within 3 seconds
" icon will
12
" icon