2.1.1 LED indictor for whole switch
There are two LEDs for whole switch system.
PWR
Green
READY
Green
2.1.2 LED indictor for 10/100Base-TX port
Each 10/100Base-TX port has three LED indicators.
LNK/ACT Green
100Mbps Green
FDX/
COL
Yellow
2.1.3 LED indictor for modules
There
are
six
LED
FGSW-2402S.
These modules have different LED
definition when different module installed.
SGSW-A1GT 10/100/1000Base-T modules
1000
Green
100
Green
10 (FX)
Green
FDX/COL Green
TX
Green
RX
Green
8
Lit: power on
Lit: CPU initial completed
Lit: port has established a valid
network connection.
Blink: traffic is passing through the port
Lit: connected on 100M speed.
Lit off: connected on 10M speed
Lit: Full-Duplex
Blink: Half-Duplex/ Collision
Off: Half-duplex or not connected
indicators
for
modules
Lit: indicate link status and connected
on 1000Mbps
Lit: indicate link status and connected on
100Mbps
Lit: indicate link status and connected on
10Mbps
Lit: Full-Duplex
Blink: Half-Duplex/ Collision
Off: Half-duplex or not connected
Lit: indicate data transmitting status
Lit: indicate data receiving status
PLANET Switch series
of