Planet FGSW-2402S User Manual page 19

FGSW-2402S
PC
Fiber 2km
FNSW-2400S
SE-800
Figure 6: End node, Hub or Switch connection
Notice:
Cable distance for Switch
The cable distance between Ethernet Switch and hub/PC
should not exceed 100 meter for UTP/STP cable, 220m
for 62.5/125 fiber cable and 500m for 50/125 fiber cable in
Gigabit Ethernet and 2 kilometers in Fast Ethernet
full-duplex.
Make sure the wiring is correct
It can be used Category 3/4/5 cable in 10 Mbps operation.
To reliably operate your network at 100Mbps and
1000Mbps, you must use an Unshielded Twisted-Pair
(UTP) Category 5 cable, or better Data Grade cabling.
While a Category 3 or 4 cable may initially seem to work,
it will soon cause data loss.
FGSW-2402S User's Manual
13