Operating Manual References
1.3.32 Conference, Unattended
3.1.3 Flexible Button Assignment—Conference button
1.1.35 Confirmation Tone
Description
At the end of a feature operation, the PBX confirms the success of the operation by sending a confirmation
tone to the extension user.
Type
Tone 1
Tone 2
Tone 3
Conditions
•
It is possible to eliminate confirmation tone 3 (except for Call Hold Retrieve with the Feature Number)
through system programming (
Access Tone).
Programming Manual References
[PT Programming]
[105] Conference Tone
[106] External Pager Access Tone
[117] Call Pickup Tone
[PC Programming]
9.1.11 Detail [1-10]—Extension—External Pager Access Tone, Extension—Call Pickup Tone, Conference—
Conference Tone
Feature Manual References
2.2.1 Tones/Ring Tones
Sent when the setting is accepted, or sent when the Extension Lock feature is
set or canceled.
Sent when the new setting is identical to the previous one, or sent when certain
features are successfully performed or accessed (e.g., Call Hold, Automatic
Callback Busy).
Sent before a conversation is established when accessing the following features:
•
Call Pickup
•
Call Hold Retrieve with the Feature Number
•
Conference
•
Paging/Paging Answer
[117] Call Pickup Tone, [105] Conference Tone, [106] External Pager
Description
1.1 General Features
Feature Manual
51