Caller Id - Panasonic KX-TA824 Feature Manual

the incoming outside (CO) line call that is waiting. The user can answer the second call by disconnecting
the current call or placing it on hold.
Conditions
• If a call waiting tone is heard but the corresponding CO button does not flash, this tone is an external
call waiting tone from the telephone company. For details, consult your telephone company.
Programming Manual References
[PT Programming]
[110] Flash/Recall Key Mode
[418] Flash/Recall Time
[PC Programming]
9.1.11 Detail [1-10]—Proprietary Telephone—Flash/Recall Key Mode
9.3.3 Detail [3-3]—Flash/Recall Time
Feature Manual References
1.1.27 Call Waiting
Operating Manual References
1.3.30 Call Waiting from the Telephone Company

1.1.30 Caller ID

Description
The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on
outside (CO) lines. This information can be shown on the displays of proprietary telephones (PTs) as well
as some single line telephones (SLTs) when receiving calls. Additionally, Caller ID information is logged in
the Incoming Call Log of the extension that received the call, allowing the caller to view a record of incoming
calls or make a call to a person in the call log later.
The PBX can be programmed to modify a caller's telephone number when it is received by, for example,
adding an Outside (CO) Line Access number or adding/deleting certain digits of incoming telephone
numbers automatically. This allows an extension user to make a call later to a telephone number logged in
his or her call log without worrying about Outside (CO) Line Access numbers, area codes, etc.
Notes
• The term "Caller ID" used in this Feature Manual refers to features that can receive caller
information sent from the telephone company and received on outside (CO) lines. Your network
provider may use a different name for this type of service.
• To receive Caller ID information, you must subscribe to the telephone company's Caller ID service
and enable Caller ID for the appropriate outside (CO) lines through system programming (
Caller ID).
Caller ID Display on SLT
This feature is available only for SLTs compatible with either FSK-type Caller ID or DTMF (Dual Tone Multi-
Frequency)-type Caller ID.
1.1 General Features
[900]
Feature Manual 43