Voice Mail Apt Integration - Panasonic KX-TA824 Feature Manual

1.1 General Features
– The user hears an alarm tone after pressing the 2-way Transfer button followed by an extension
number.
Feature Manual References
1.1.61 Flexible Buttons

1.1.120 Voice Mail APT Integration

Operating Manual References
1.3.87 Two-way Recording in the VPS (Voice Mail APT Integration only)
3.1.3 Flexible Button Assignment—2-way Record or 2-way Transfer button
1.1.120 Voice Mail APT Integration
Description
A Panasonic Voice Processing System (VPS) that supports APT Integration can provide many features and
conveniences that are unachievable using traditional voice mail systems that rely on Inband (DTMF)
Integration.
Many of these features are explained below. For more information, refer to the Installation Manual supplied
with the Panasonic VPS.
1.
Automatic Configuration—Quick Setup (or DIP switch initialization without a PC)
The PBX shares information with the VPS during setup that allows the VPS to automatically create the
appropriate mailboxes for all extension numbers.
The following settings to enable APT Integration must be programmed through system programming to
match the settings of the VPS.
When 2 VPSs are connected to the PBX, note that each extension can have only one mailbox, but when
the VPSs have executed Automatic Configuration, an extension has a mailbox in both VPSs. Therefore,
an extension user must delete a mailbox in either VPS so that there are no duplicates.
PBX
This example uses a Panasonic KX-TVS50 series VPS/KX-TVA50 series VPS, which can be connected
with 4-conductor wire to 4 extension jacks of the PBX.
154 Feature Manual
Extension
group 7
7
8
15
16
Extension
group 8
VPS
Port 1
Port 2
VPS
Port 1
Port 2