Feature Highlights - Panasonic KX-TA824 Feature Manual

Feature Highlights

Built-in Voice Message (BV) (Optional voice message card required)
Built-in Voice Message (BV) allows a caller to leave a voice message in a user's personal message area or
the PBX's common message area (
Caller ID Display on SLT
The PBX can receive Caller ID information (telephone numbers and callers' names) from calls received on
outside (CO) lines. This information can be shown on the displays of SLTs that support Caller ID as well as
proprietary telephones (PTs) when receiving calls (
3-level Automated Attendant (AA)
3-level Automated Attendant (AA) service allows a caller to dial a single-digit number (Direct Inward System
Access [DISA] AA number) following the guidance of 3-level DISA outgoing messages (OGMs), and be
connected to the desired party automatically (
PC Programming
System programming settings can be accessed using a PC and the Panasonic KX-TA Maintenance Console
software as well as by using a PT (
The PBX software can be upgraded via the Serial Interface (RS-232C port) or USB port, using the KX-TA
Maintenance Console software (
Automatic Configuration for Outside (CO) Line Type
The dialing mode of connected outside (CO) lines is automatically configured the first time the PBX is
accessed with a PC using the KX-TA Maintenance Console software, or after the PBX data has been
cleared ( 1.1.5 Automatic Configuration for Outside (CO) Line Type).
Call Waiting Caller ID
Call Waiting Caller ID allows the user to see the name or telephone number of a second caller during a
conversation ( 1.1.28 Call Waiting Caller ID).
Local Carrier-based Voice Mail Service
Local carrier-based voice mail service allows the user to receive remote voice mail service from the
telephone company to record caller messages when calls cannot be answered (
based Voice Mail Service).
Wireless Proprietary Telephones (PTs)
Wireless PTs such as the KX-T7885 and the KX-TD7895 give a user the freedom to move around and still
have the powerful features of Panasonic PTs. Some examples of the advantages of wireless PTs over
wireless SLTs are:
a)
Caller ID
b)
Seizure of outside (CO) lines by a one-touch operation
c)
Carrier-based voice mail service
Refer to the Operating Instructions of the wireless PT for additional information.
4 Feature Manual
1.1.8 Built-in Voice Message (BV)).
1.1.30 Caller ID).
1.1.41 Direct Inward System Access (DISA)).
1.1.99 PC Programming).
1.1.58 Firmware Upgrade).
1.1.78 Local Carrier-